| Kirloskar TV I Engine performance and emission characteristics of methyl ester Mahua (Madhuca Indica) & Red Mud transesterified Mahua oil/diesel blends | National conference on Advancements in Mechanical, Environment, Safety and Health Engineering (AMESHE15), Knowledge Institute of Technology, Salem | 09.05.2015 | ||
| Intelligent human counter by using sensors | National conference on Advancements in Mechanical, Environment, Safety and Health Engineering (AMESHE15), Knowledge Institute of Technology, Salem | 09.05.2015 | ||
| Reduction of filling time in injection moulding machine by using hydraulic system | National conference on Advancements in Mechanical, Environment, Safety and Health Engineering (AMESHE15), Knowledge Institute of Technology, Salem | 09.05.2015 | ||
| Studies On Environment, Health And Safety (EHS) Practices In A Small Scale And Large Scale Indian Industry | National Conference on Advancements in Mechanical, Environment, Safety and Health Engineering (AMESHE 2014), Knowledge Institute of Technology, Salem | 05.03.2014 | ||
| Service performance measurement using Taguchi's Quality Loss function Phase Change | National conference on optimization techniques in Engineering sciences and Technologies (OPTEST 06) Bannari Amman Institute of Technology, TN, India | 11.04.2006 12.04.2006 |
||
| Analysis of Airflow rate in single sided ventilated building structure | National conference on optimization techniques in Engineering sciences and Technologies (OPTEST 06) Bannari Amman Institute of Technology, TN, India | 11.04.2006 12.04.2006 |
||
| Design of Laminated Dynamic Vibration Absorber and isolator to reduce vibration in Railways | National conference on optimization techniques in Engineering sciences and Technologies (OPTEST 06) Bannari Amman Institute of Technology, TN, India | 11.04.2006 12.04.2006 |
||
| Experimental investigation of Hollow Clay Tile laid over Rein Forced Cement Concrete | National conference on optimization techniques in Engineering sciences and Technologies (OPTEST 06) Bannari Amman Institute of Technology, TN, India | 11.04.2006 12.04.2006 |
||
| Analysis of Airflow Rate in Single Sided Ventilated Building Structure | National conference on optimization techniques in Engineering sciences and Technologies (OPTEST 06) Bannari Amman Institute of Technology, TN, India | 11.04.2006 12.04.2006 |
||
| Material as a thermal storage material for Peak load shifting | National Conf at kumaraguru college of technology, coimbatore | 17.03.2006 18.03.2006 |
||
| Design of compliant actuator for active Vibration isolation | National Conf at St.Joseph College of Engg., Chennai | 02 .02.2006 | ||
| Experimental investigation of Hollow Clay Tile laid over Reinforced Cement Concrete | National Conf at Annamali University, Annamalai Nagar | 17.03.2006 18.03.2006 |
||
| Performance of hollow clay tile (HCT) Laid over reinforced cement concrete (RCC) roof- An Experimental analysis | National Conf at lIT, Mumbai | 07.12.2006 09.12.2006 |
||
| Hollow Clay Tile Laid (HCT) Reinforced Cement Concrete (RCC) for Energy Efficient Eco- Friendly (3E) Buildings | National Conf at lIT, Mumbai | 08.12.2006 09.12.2006 |
||
| Analysis of Heat Transfer Rate in Single Sided Ventilated Building Structure | National Conf at Indian Institute of Technology, Guwahati | 04.01.2006 06.01.2006 |
||
| Optimization of composite panels - A review | National Conf at Erode Sengunthar Engineering College. | 23.02.2006 24.02.2006 |
||
| Mesh-free analysis of cracks in isotropic functionally graded materials | National Conf at Erode Sengunthar Engineering College. | 23.02.2006 24.02.2006 |
||
| Three-dimensional thermo-elastic deformations of a functionally graded plate | National Conf at JSS College , Mysore | 25.09.2006 26.09.2006 |
||
| Analysis of Effect of Guide Slots in Commercial Shop Display Cabinets | National Conference, AAQMENT 2006 Erode Sengunthar Engg. College, Perundurai | 2006 | ||
| Recent Trends And Issues In The Evaluation Of Appropriate Technologies For Integrated Rural Development | National Conf at Rural Insititute (Deemed University), Gandhigram | 04.03.2005 05.03.2005 |
||
| Analysis of single sided ventilated configurations | National conference on Mechanical Engineering research, Bharath Inst. Of Higher Education and Research, Chennai.(Deemed University) | |||
| Comparison Of Single Sided Naturally Ventilated And Cross Ventilated Rooms Using CFD | National conference on Recent trends in Design and Manufacturing Technologies, Kumaraguru College of Technology, Coimbatore | 17.03.2005 18.03.2005 |
||
| An overview of condensate inundation effects in HIF | National Conference on Advances in Engineering Design, Bannari Amman Institute of Technlogy, Sathyamangalam | 29.04.2005 30.04.2005 |
||
| Experimental analysis of condensate drainage pattern during condensation over horizontal integral finned tubes | National Conference on Advances in Engineering Design, Bannari Amman Institute of Technlogy, Sathyamangalam | 29.04.2005 30.04.2005 |
||
| Optimization of large scale solar hot water system using Tauguchi Method | National Conference on Globally Competitive Eco- Friendly Technologies In Mechanical and Mechatronics Engineering-GETME 2005, Kongu Engineering College, Perundurai, Erode-638 052, Tamilnadu, India, Erode | April, 2005 | ||
| Axi- symmetric bending of FGM circular plates | National Conference on Globally Competitive Eco- Friendly Technologies In Mechanical and Mechatronics Engineering-GETME 2005, Kongu Engineering College, Perundurai, Erode-638 052, Tamilnadu, India, Erode | April, 2005 | ||
| Service performance measurement using Taguchi's Quality Loss function | National Conference on Globally Competitive Eco- Friendly Technologies In Mechanical and Mechatronics Engineering-GETME 2005, Kongu Engineering College, Perundurai, Erode-638 052, Tamilnadu, India, Erode | April, 2005 | ||
| Phase Change Material as a thermal storage material for Peak load shifting | National Conference on Advances in Engineering Design, Bannari Amman Institute of Technlogy, Sathyamangalam | 29.04.2005 30.04.2005 |
||
| Design of compliant actuator for active Vibration isolation | National conference on Advances In manufacturing and resource Analysis, PSNA College of Engineering and Technology, Dindugul, Tamilnadu, India, | 05.02.2005 | ||
| Design of compliant actuator for active Vibration isolation | National conference on contemporary Approaches In Design and Manufacturing at Alagappa Chettiyar College of Engineering and Technology, Karaikudi | 05.03.2005 | ||
| Design of Laminated Dynamic Vibration Absorber and isolator to reduce vibration in Railways | National Conference on Advances in Mechanical and Production Engineering the ERA of Globalization AMPEEG at Tagore Engineering College-Chennai- India. | 05.02.2005 | ||
| Experimental investigation of Hollow Clay Tile laid over Reinforced Cement Concrete | National conference on "Advances in Mechanical and Production Engineering in the era of Globalization" AMPEEG 2005. Tagore Engineering College | 05.02.2005 | ||
| Optimization of composite panels - A review | National Conference on Globally Competitive Eco Friendly Technologies Kongu Engineering College, Perundurai | 13.04.2005 14.04.2005 |
||
| Analysis of Temperature Distribution Inside the Heating Oven | National Conference on Globally Competitive EcoFriendly Technologies in Mechanical and Mechatronics Engineering (GETME 2005), Kongu Engineering College, Perundurai | 15.04.2005 16.04.2005 |
||
| Analysis of Horizontal Spacing Between the Foodstuffs in Heating Ovens | National Conference on Globally Competitive EcoFriendly Technologies in Mechanical and Mechatronics Engineering (GETME 2005), Kongu Engineering College, Perundurai | 15.04.2005 16.04.2005 |
||
| Analysis of signal sided naturally ventilated rooms using CFD | National Conference on Globally Competitive EcoFriendly Technologies in Mechanical and Mechatronics Engineering (GETME 2005), Kongu Engineering College, Perundurai | 15.04.2005 16.04.2005 |
||
| Studies on Evaporative coolers and cooling system | National Conference on Globally Competitive EcoFriendly Technologies in Mechanical and Mechatronics Engineering (GETME 2005), Kongu Engineering College, Perundurai | 15.04.2005 16.04.2005 |
||
| Experimental investigation of Hollow Clay Tile laid over Reinforced Cement Concrete | National Conference on Globally Competitive EcoFriendly Technologies in Mechanical and Mechatronics Engineering (GETME 2005), Kongu Engineering College, Perundurai | 15.04.2005 16.04.2005 |
||
| Performance of hollow clay tile (HCT) Laid over reinforced cement concrete (RCC) roof - An Experimental analysis | National Conference on Globally Competitive EcoFriendly Technologies in Mechanical and Mechatronics Engineering (GETME 2005), Kongu Engineering College, Perundurai | 15.04.2005 16.04.2005 |
||
| Hollow Clay Tile Laid (HCT) Reinforced Cement Concrete (RCC) for Energy Efficient Eco- Friendly (3E) Buildings | National Conference on Globally Competitive EcoFriendly Technologies in Mechanical and Mechatronics Engineering (GETME 2005), Kongu Engineering College, Perundurai | 15.04.2005 16.04.2005 |
||
| Analysis of Heat Transfer Rate in Single Sided Ventilated Building Structure | National Conference on Globally Competitive EcoFriendly Technologies in Mechanical and Mechatronics Engineering (GETME 2005), Kongu Engineering College, Perundurai | 15.04.2005 16.04.2005 |
||
| Analysis of single sided ventilated configurations | National Conference on Globally Competitive EcoFriendly Technologies in Mechanical and Mechatronics Engineering (GETME 2005), Kongu Engineering College, Perundurai | 15.04.2005 16.04.2005 |
||
| Analysis of Airflow Rate in Single Sided Ventilated Building Structure | National Conference on Globally Competitive EcoFriendly Technologies in Mechanical and Mechatronics Engineering (GETME 2005), Kongu Engineering College, Perundurai | 15.04.2005 16.04.2005 |
||
| Comparison of single sided naturally ventilated and cross ventilated rooms using CFD | National Conference on Globally Competitive EcoFriendly Technologies in Mechanical and Mechatronics Engineering (GETME 2005), Kongu Engineering College, Perundurai | 15.04.2005 16.04.2005 |
||
| Mesh-free analysis of cracks in isotropic functionally graded materials | Emerging Adaptive Systems and Technologies EAST- 2005. Noorul Islam College of Engineering, Kumaracoil, Kanyakumari | 16.12.2005 17.12.2005 |
||
| Analysis of Single sided naturally ventilated room using CFD | National Conference on Advanced in Mechanical and Production Engineering in the ERA of Globalization (AMPEEG 2005) held at Tagore Engineering College, Chennai | 05.02.2005 | ||
| Performance Evaluation and Emission control of Low - speed Diesel Engine using Bio Diesel | National conference on "Recent development In Mechanical Engineering", Jayam Engineering College | 02.07.2004 03.07.2004 | ||
| Analysis of Effect of Holes in Commercial Shop Heating Ovens | NCDCM 2004, MIT | 04.04.2004 | ||
| Effect of the hollow shape in heat transfer across Hollow Clay Tile Kar (HCT) laid RCC roof using fluent | 30th FMFP conference National Institute of Technology, Surathakal, Surathkal nataka | 03.12.2003 | ||
| Multi - Point Fuel Injection | National Conference on "Emerging Trends In Engineering and impact innoversion", Kaparagam Polytechnic, Coimbatore | 01.09.2003 02.09.2003 |
||
| Optimum design & analysis of vibration absorbers to reduce response amplitude of primary system | Int. National Conf. on Digital Aided Modelling and Simulation: DAMS-2003, IT, Coimbatore | 06.01.2003 08.01.2003 |
||
| Analysis of Bakery Oven Using ANSYS 7.0 | ASME Heat and Mass National & 5th ISHMT I ASME Heat and Mass Transfer Conference, Calcutta | January 2002 | ||
| Customer Relationship Management (CRM) in Automobile Repair Shops from Service Quality Perspective | National Conference on Recent trends in manufacturing technology and management, Adiaman Engineering College, Hosur | 02.01.2002 | ||
| Service Quality -A literature review | National Seminar on Modern Trends in Automobiles, Rajarambabu Institute of Tech., Sangli | 01.08.2002 02.08.2002 |
||
| Ergonomics interventions in indian middle class hotel kitchens | National Conference on Recent Trends in CAD & CAM, JNTU College of Engg.,Kakinada | 30.03.2002 31.03.2002 |
||
| Analysis of Commercial Shop Heating Ovens | 2nd National conference on Rapid proto typing, Rapid proto typing society of India, Bangalore | November, 2001 | ||
| Effect of speed and ground slope in fuel consumption of a mini car | National Conference ENVIRO-2001, PSG. Tech, Coimbatore, India | 01.09.2001 | ||
| Bio Modeling Through Rapid Prototyping - an integrated approach | Proc. of 15th National & 4th ISHMT / ASME Heat and Mass Transfer Conf., IAT, Pune | January, 2000 | ||
| Aerodynamic Study and Detail Optimization of Indian Mini Car using Finite Element Method | 24 th National Renewable Energy Convention-2000, Indian Institute of Technology, Bombay | Dec, 2000 | ||
| Energy Conscious Buildings for Sustainable Development | Proc. of 1st Int. Conf & 25th National Conf. on Fluid Mechanics and Fluid Power, Indian Institute of Tech., New Delhi | December, 1998 | ||
| Analysis of Effect of Guide Slots in Commercial Shop Display Cabinets | National Conference on Design for Product Life Cycle, Bits, b Pilani. | December, 1999 | ||
| Principle of hydraulics and pneumatics system design and automation | National Conference on advanced trend in mechanical engineering research and development held at Department of Mechanical Engineering, JNTU College of Engineering, Anantapur, AP, India | 21st Dec 2002 | ||
| Improvement of collector efficiency and reduction of thermal losses in air heater | National Conference on advanced trend in mechanical engineering research and development held at Department of Mechanical Engineering, JNTU College of Engineering, Anantapur, AP, India | 21st Dec 2002 | ||
| Industrial Engineering & its techniques A case study | National Conference on advanced trend in mechanical engineering research and development held at Department of Mechanical Engineering, JNTU College of Engineering, Anantapur, AP, India | 21st Dec 2002 | ||
| Analysis of Single sided naturally ventilated room using CFD | National Conference on Advanced in Mechanical and Production Engineering in the ERA of Globalization (AMPEEG 2005) held at Tagore Engineering College, Chennai | 5th Feb 2005 | ||
| Analysis of single sided ventilated configurations | National Conference on Globally competitive ECO-friendly technologies in Mechanical and Mechatronics Engineering (GETME 2005), held at Kongu Engineering College, Perundurai, Erode, TN, India | April15-16th 2005 | ||
| Supplier selection using K-means clustering algorithm and Decriminant analysis, | National Conference on Emerging Trends in Industrial Engineerng and Management (ETRIM 2011) | July 11-12,2011 | ||
| Improving service Quality Using Data Envelop Analysis A Case Approach, | National Conference on Management Science and Practice, | 31 March-1 April 2006 | ||
| Application of Clustering Technique for the Supplier Selection for the OEM company, | National Conference on Management Science and Practice, | 31 March-1 April 2006 | ||
| Analysis of Criteria for the Supplier Selection in Supply Chain Environment, | National Conference on Management Science | 2- 4 Feburary 2006 | ||
| EDM Machining Parameters Optimization Using Design of Experiment, | National Conference on Recent Trends in Mechanical Engineering, | 24-25 April 2009 | ||
LIST OF PUBLICATIONS – NATIONAL CONFERENCEwebadmin2022-04-27T12:36:15+05:30