International Journals
S.No
Authors
Tile of the Article
Name of the Journal
Year, Vol., Page Nos.
1Dr.PSS.SrinivasanKirloskar TV – I Engine performance and emission characteristicsof methyl ester Mahua (Madhuca Indica) & Red Mud transesterified Mahua oil/diesel blendsInternational Journal of Applied Engineering Research, ISSN 0973-45622015, 10,50,1323-1328
2Dr.PSS.SrinivasanReduction of Filling Time in Injection Moulding Machine by Using Hydraulic SystemInternational Journal of Applied Engineering Research, ISSN 0973-45622015, 10, 50, 155-158
3P.Murugesan, K.Mayilsamy, S.Suresh, PSS.SrinivasanHeat transfer and pressure drop characteristics in a circular tube fitted with and without V-cut twisted tape insertInternational Communications in Heat and Mass Transfer2011, 38 (3), 329-334, 68
4P.Murugesan, K.Mayilsamy, S.Suresh, PSS.SrinivasanHeat transfer and pressure drop characteristics of Turbulent flow in a tube fitted with trapezoidalcut Twisted tape insertInternational journal of academic research2009, 1 (1), 38
5M.Ravikumar, PSS.SrinivasanPhase change material as a thermal energy storage Material for cooling of buildingJournal of Theoretical & Applied Information Technology2008, 4 (6), 36
6KCK.Vijaykumar, PSS.Srinivasan, S.DhandapaniA performance of hollow clay tile (HCT) laid reinforced cement concrete (RCC) roof for tropical summer climatesEnergy and Buildings2007, 39 (8), 886-892, 36
7G.Nallakumarasamy, PSS.Srinivasan, KV.Raja, R.MalayalamurthiOptimization of operation sequencing in CAPP using simulated annealing technique (SAT)The International Journal of Advanced Manufacturing Technology2011, 54 (58), 721-728, 23
8S.Senthilkumar, K.Perumal, PSS.Srinivasan, SadhanaOptical and thermal performance of a three dimensional compound parabolic concentrator for spherical absorberSadhana2009, 34 (3), 369-380, 18,
9R.Parameshwaran, PSS.Srinivasan, M.PunniyamoorthyIntegrating fuzzy analytical hierarchy process and data envelopment analysis for performance management in automobile repair shopsEuropean Journal of Industrial Engineering2009, 3 (4), 450-467, 15
10C.Jegadheesan, VP.Arunachalam, SR.Devadasan, PSS.SrinivasanDesign and development of modified service failure mode and effects analysis modelInternational Journal of Services and Operations Management2006, 3 (1), 111-126, 11
11PSS.Srinivasan, M.PunniyamoorthyAn integrated approach for performance enhancement in automobile repair shops, R ParameshwaranInternational Journal of Business Excellence2009, (1), 77-104, 10
12R.Parameshwaran, PSS.SrinivasanAn integrated closed loop model for service performance managementInternational Journal of Services and Operations Management2008, 4 (1), 34-55, 10
13G.Nallakumarasamy, PSS.Srinivasan,
KV.Raja,
R.Malayalamurthi		Optimization of operation sequencing in CAPP using superhybrid genetic algorithms simulated annealing techniqueISRN Mechanical Engineering2011, 897498, 7
14R.Parameshwaran, PSS.Srinivasan, M.PunniyamoorthyModified closed loop model for service performance managementInternational Journal of Quality & Reliability Management2009, 26 (8), 795-816, 7
15KK.Ramsamy,
P.Srinivasan		Wind Assisted Domestic Solar Hot Water System–A Novel ApproachEuropean Journal of Scientific Research2011, 49 (1), 132-141, 6
16M.Ravikumar, PSS.SrinivasanHeat transfer analysis in PCM filled RCC roof for thermal managementJournal of Engineering and Applied Sciences2006, 7, 6
17A.Somasundaram, PSS.SrinivasanDesign optimization of dosa making workstation for smooth ergonomic interfaceJournal of Scientific and Industrial Research2010, 69 (3), 221-224, 5
18K.Tamilarasan,
K.Perumal,
PSS.Srinivasan		Performance of forced and wind assisted domestic solar hot water systems–a comparative experimental studyJournal of Scientific and Industrial Research2008, 67, 717-723, 5
19M.Ravikumar, PSS.SrinivasanAnalysis of Heat Transfer Across Building Roof with Phase Change MaterialJournal of Computational Information Systems2012, (4), 1497-1505, 4
20K.Senthilkumar, PSS.SrinivasanApplication of Taguchi method for the optimization of system parameters of centrifugal evaporative air coolerJournal of Thermal ScienceJournal of Thermal Science19 (5), 473-479
21K.Visagavel,
PSS.Srinivasan		Experimental investigation on solar air heater assisted natural ventilation in single sided ventilated roomIndian Journal of Science and Technology2010, 3 (7), 803-807, 4
22G.Arunkumar, PSS.SrinivasanDesign of displacement amplifying compliant mechanisms with integrated strain actuator using topology optimizationProceedings of the Institution of Mechanical Engineers2006, 4
23PSS.Srinivasan, PP.Sethusundaram, KCK.Vijakumar, R.DeivasigamaniHollow Clay Tiled RCC Roofs foR Human Comfort and Energy SavingsRenewable Energy Technology for the New MillenniumProceedings, 4, 2000
24R.Vijayan,
PSS.Srinivasan		Experimental evaluation of internal heat exchanger influence on R22 window air conditioner retrofitted with R407CThermal Science2010, 14 (1), 39-47, 3
25R.Vijayan,
PSS.Srinivasan		Influence of internal heat exchanger on performance of window AC retrofitted with R407CJournal of Scientific and Industrial Research2009, 68 (2), 153, 3
26M.Ravikumar, PSS.SrinivasanNatural Cooling of Building using Phase Change MaterialInternational Journal of Engineering and Technology2008, 5 (1), 110, 3
27S.Senthilkumar,
K.Perumal,
PSS.Srinivasan		Construction and performance analysis of a three dimensional compound parabolic concentrator for a spherical absorberJournal of Scientific and Industrial Research2007, 66 (7), 558, 3
28K.Visagavel,
PSS.Srinivasan		Analysis of Cross and Single Sided Naturally Ventilated Rooms Using CFDAmerican Journal of Environmental Sciences2007, (4), 188-192, 2
29P.Navaneethakrishnan, PSS.Srinivasan, S.DhandapaniEffect of heating coil in commercial shop display cabinetJournal of the Indian Institute of Science2013, 86 (5), 457, 1
30K.Senthilkumar, PSS.SrinivasanExperimental study of centrifugal humidifier fitted in an industrial shed located in tropical climatesThermal Science2011, 15 (2), 467-475, 1
31P.Navaneethakrishnan, PSS.Srinivasan, S.DhandapaniNumerical and experimental investigation of temperature distribution inside a heating ovenJournal of food processing and preservatio2010, 34 (2), 275-288, 1
32M.Ravikumar, PSS.SrinivasanAnalysis of natural cooling of building using phase change materialsInternational Journal of Engineering and Technology5, 1, 1-10, 2008,
33R.Kumaravelan, PSS.Srinivasan, P.Tamilselvam,
M.Madhan		Intensification of the Subsisting Methodology to Enhance DFM without DiscretizationJournal of Engineering and Technology2012, 2 (2), 87
34K.Senthilkumar, PSS.SrinivasanA Parametric and Experimental Study of a Centrifugal Atomizer Fitted in an Industrial Shed Located in a Tropical ClimateArabian Journal for Science and Engineering2012, 37 (4), 1089-1100
35M.Ravikumar, PSS.SrinivasanAnalysis of heat transfer across phase change material filled reinforced cement concrete roof for thermal managementProceedings of the Institution of Mechanical EngineersPart C, 2012
36KK.Ramasamy, PSS.SrinivasanExperimental investigation of forced and wind assisted domestic solar hot water systemsProceedings of the Institution of Mechanical EngineersPart C, 2011
37KK.Ramasamy, PSS.SrinivasanEnhancement of natural circulation type domestic solar hot water system performance by using a wind turbineJournal of Thermal Science2011, 20 (4), 371-376
38GA.Kumar,
PSS.Srinivasan		Design of Compliant Mechanisms A Topology Optimization Approach for New Age Industries and Engineering SupportCURIE Journal2010, 3
39P.Srinivasan,
P.Palanichamy		Applications of topology in automobile engineeringJournal of Experimental Sciences2010, 1 (1)
40Senthilkumar Krishnasamy, PSS SrinivasanOptimizing Process Parameters of Centrifugal Evaporative Air CoolerInternational J. of Recent Trends in Engineering and Technology2010, 3 (6)
41AG.Kumar,
PSS.Srinivasan		Design of Force and Displacement Amplifying Compliant Mechanisms A Multicriteria Optimization ApproachCURIE Journal2009, 2 (3)
42PSS.Srinivasan, S.NithiyanandamEnergy Savings in Compressed Air Supply System using Dynamic ControllerJournal of Energy Heat And Mass Transfer2008, 30 (1), 89
43K.Vijaykumar, S.Dhandapani, PSS.SrinivasanEnergy Efficient Ecofriendly (E^ 3) Roof A Transient Thermal AnalysisJournal of Energy Heat And Mass Transfer2007, 29 (1), 27
44S.Senthilkumar,
K.Perumal,
PSS.Srinivasan		Performance Analysis of a Three Dimensional Compound Parabolic ConcentratorJournal of Energy Heat And Mass Transfer2007, 29 (3), 241
45KCK.Vijaykumar, PSS.Srinivasan, S.DhandapaniTransient thermal analysis of hollow clay tiled concrete roof for energy conservation and comfortJournal of Scientific And Industrial Research2006, 65 (8), 670
46GA.Kumar,
PSS.Srinivasan		Topology Optimisation of Compliant Mechanisms for Displacement Amplification in Strain ActuatorsJournal of the Institution of Engineers(India)2006, Part MC, Mechanical
47P.Navaneethakrishnan, PSS.Srinivasan, S.DhandapaniNumerical and Experimental Investigation of Heating OvensJournal of Energy Heat And Mass Transfer2006, 28 (4), 251
48Mathi Arasu,
A.Geddam,
PSS.Srinivasan,
DGH Samuel		Computer Aided Ergonomic Design of Helmets Using BiomodellingComputer Aided Design and Applications2004, 1 (14), 641-647
49N.MathiArasu, PSS.Srinivasan, KCK.VijayakumarTrend Predictions in Effect of Spoilers for a Mini Car: A Low Cost SolutionASME/JSME 2003 4th Joint Fluids Summer Engineering Conference2003, 1255-1260
50Palanivelu Rajmohan
Dr.PSS.Srinivasan		Studies on Safety Practices in Indian Industries Through The Use Of Working GroupsSafety Science2019
51Dr.K.VisagavelAnalysis of single side ventilated and cross ventilated rooms by varying the width of the window opening using CFDSolar Energy2009, 83 (1), 2-5
52Dr.K.VisagavelExperimental investigation on solar air heater assisted natural ventilation in single-sided ventilated roomIndian Journal of Science and Technology2010, 3 (7), 803-807
53Dr.K.VisagavelAnalysis of cross and single sided naturally ventilated rooms using CFDAmerican Journal of Environmental Sciences2007, 3 (4), 188-192
54Dr.K.VisagavelRisk Assessment for Blast Furnace Using FMEAInternational Journal of Research in Engineering and Technology2014, 3, 27-31
55Dr.K.VisagavelOccupational Health and Safety Management in Manufacturing IndustriesJournal of Scientific & Industrial Research2014, 73, 381-386
56Dr.K.VisagavelFailure mode and effect analysis using fuzzy analytic hierarchy processInternational Journal of Productivity and Quality Management2014,14 (3), 296-313
57Dr.K.VisagavelFire accident prevention system in heavy vehiclesNCAMESHE 20142014,03(11) ,220-221
58Dr.K.VisagavelDevelopment of biodegradable baby diapersNCAMESHE 20142014,03(11) ,186-191
59Dr.K.VisagavelStudying the thermal behaviour of concrete structure Using nanoencapsulated phase change materialsNCAMESHE 20142014,03(11) ,107-111
60Dr.K.VisagavelFabrication and testing of refrigeration using engine Waste heatNCAMESHE 20142014,03(11) ,299-304
61Dr.K.VisagavelEffective Use Of Bio Waste In InstitutionsNCAMESHE 20142014,03(11) ,202-204
62Dr.K.VisagavelExposure hazard analysis in cement fiber sheet Manufacturing industryNCAMESHE 20142014,03(11) ,76-80
63Dr.K.VisagavelCharacteristic data analysis of occupational accident in heavy engineering industryNCAMESHE 20142014,03(11) ,102-106
64Dr.K.VisagavelAssessment of indoor air quality in an automobile IndustryNCAMESHE 20142014,03(11) ,265-272
65Dr.K.VisagavelEvaluvation of noise level and its adverse effect in metal Die manufacuturing industryNCAMESHE 20142014,03(11) ,252-255
66Dr.K.VisagavelApplying fuzzy ahp to evaluate the carbon foot print on the workplace in educational institutionsNCAMESHE 20142014,03(11) ,124-129
67M.Senthil,
Dr.K.Visagavel,
CG. Saravanan
Karthick Rajendran		Investigations of red mud as a catalyst in Mahua oil biodiesel production and its engine performanceFuel Processing Technology149,  2016, 7-14
68M.Senthil,
Dr.K.Visagavel
Avinash A		Effects of exhaust gas recirculation on emission characteristics of Mahua (Madhuca Indica) biodiesel using red mud as catalystEnergy Source Part A: Recovery, Utilization, and Environmental EffectsVolume 38, 2016 - Issue 6
69P.Parthiban,
H.Abdul Zubar,
Pravin Katakar		Vendor selection problem: A multi-criteria approach based on strategic decisionsInternational Journal of Production Research2013,Volume 51, Issue 5
70P.Parthiban,
H.Abdul Zubar		An integrated multi objective decision making process for the performance evaluation of the vendorsInternational Journal of Production Research2013,Volume 51 Issue 13
71P.Parthiban,
H.Abdul Zubar		Hybrid MCDM approach for vendor rankingJournal of Manufacturing Technology Management2013,Volume 24 Issue 6
72P.Parthiban,
H.Abdul Zubar		MASS: an analytical model for assessment of supply chain entityInternational Journal of Operational Research2013,Volume 18 Issue 3
73P.Parthiban,
H.Abdul Zubar		Analysis of Supplier Selection Methods through Conceptual Module and Empirical StudyInternational Journal of Logistics Systems and Management2014,Volume 18 Issue 1
74P.Parthiban,
H.Abdul Zubar		Analysis of Supplier Selection Methods through Analytical ApproachInternational Journal of Logistics Systems and Management2013, Volume 18 Issue 1
75P.Parthiban,
H.Abdul Zubar,
Chintamani Garge		A multi criteria Decision making approach for supplier selectionInternational Journal of Procedia Engineering2012, Volume 38, Pp 2312-2328
76H.Abdul Zubar,
G.Kannan		Application of Fuzzy Controller for the Model Building of Preparation of Pulp in Paper   Industry,International Journal of Programmable Device Circuits and Systems2009
77H.Abdul Zubar,
K.Visagavel,
Arun Mohan,
V.Deeparaja		occupational Health and Safety Management in Manufacturing Industries,Journal of Scientific & Industrial Research2014, Volume 73 Pp 381-386
78H.Abdul Shabeer, M.S.D.Wahidha Banu, H.Abdul ZubarTechnology to Prevent Mobile Phone AccidentsInternational Journal of Enterprise Network Management2012, Volume 5 Issue 2
79M.Arunkumar,
K.Visagavel,
H.Abdul Zubar		Assessment Of Indoor Air Quality In An Automobile Industry,International Journal of Research in Engineering and Technology2013,Volume 03 Issue 11
80M.Ravi Kumar,
P.Parthiabn,
H.Abdul Zubar		Leanness Evaluation in six Manufacturing MSME using AHP & SEM Techniques,International Journal of Mechanical & Mechatronics Engineering2013,Volume 13 Issue 06
81H.Abdul Shabeer,
H.Abdul Zubar		Safety device to prevent cell phone accidentsJournal of Scientific & Industrial Research2014, Volume 73, Pp 361-368
82K.Dhanasekar, V.S.Manigandan,
H.Abdul Zubar
K.Visagavel		Characteristic Data Analysis Of Occupational Accident In Heavy Engineering Industry,International Journal of Research in Engineering and Technology2014, Volume 03 Issue 11
83M.M.Ravikumar,
K.Marimuthu
H.Abdul Zubar		Critical Issues of Lean Implementation in Indian Micro, Small and Medium Enterprises-An AnalysisResearch journal of Applied Sciences, Engineering and Technology2014, Volume 7 issue 13
84M.M.Ravikumar, K.Marimuthu
H.Abdul Zubar		Application of AHP for Lean Implementation Analysis in 6 MSMEsInternational Journal of Engineering and Technology2014, Volume 6 issue 2
85A.Parthiban,
R.Ravikumar,
H.Abdul Zubar
M.Duraiselvam		Experimental investigation of CO2 laser cutting on AISI 316L sheetJournal of Scientific and Industrial Research2014, Volume 73, Pp387-393
86M.M.Ravikumar,
K.Marimuthu
H.Abdul Zubar		Critical Success factors and obstacles of lean implementation in micro, small and medium enterprisesJournal of Scientific and Industrial Research2014, Volume 8 issue 3
87H.Abdul Zubar
Arun Mohan		Assessment Of Ergonomics In Manufacturing Industries,International Journal of Applied Engineering Research2014, Volume 9, ssue 27
88G.Sasikumar,
M.Senthil,
K.Visagavel,
H.Abdul Zubar
T.Dheenathayalan		Development of Bio-Degradable baby diapersInternational Journal of research in engineering and technology2013, Volume 03 issue 11
89H.Arun Mohan,
H.Abdul Zubar
K.Visagavel		Significance Of Health And Safety Management In Healthcare Service ProvidersInternational Journal of Research in Engineering and Technology2013, Volume 03 issue 11
90P Navaneethakrishnan
PC Murugan,
P Saji Raveendran
S Joseph Sekhar
W Beno Wincy,
Godwin Glivin		Investigation on the technical and economic benefits of implementing biomass gasifier in clay brick manufacturing industriesSustainable Energy Technologies and Assessments102554, 2022, 53
91P Navaneethakrishnan Baaskaran Natarajan,
Shankar Subramaniam, Karupannasamy,
Sathishranganathan Chinnasamy,
Sachin Bala Rajagopal		Augmentation of crashworthiness design of circular tubular structures by engraving grooves of varying depthsMechanics of Advanced Materials and Structures1-14, 2022
92P Navaneethakrishnan Muniraju Muralidharan, Thottyeapalayam Palanisamy Sathishkumar,
Nagarajan Rajini
Shanmugam Arun Kumar,
Sikiru Oluwarotimi Ismail
Krishnasamy Senthilkumar,
Suchart Siengchin		Evaluation of tensile strength retention and service life prediction of hydrothermal aged balanced orthotropic carbon/glass and Kevlar/glass fabric reinforced polymer hybrid compositesJournal of Applied Polymer Science139,6, 51602, 2022
93P Navaneethakrishnan G Rajeshkumar,
S Gokulkumar		Natural Fibre- Reinforced Bio compositesAdvances in Bio-Based Fibre (Book Chapter)2022
94P Navaneethakrishnan Tottyeapalayam Palanisamy Sathishkumar, Subramani Satheeshkumar,
Impact strength retention and service life prediction of 0- degree laminate jute fibre woven mat reinforced epoxy compositesAdvances in Bio-Based Fibre (Book Chapter)393-406, 2022
95P Navaneethakrishnan
TP Sathishkumar
MR Sanjay
Suchart Siengchin
S Karthi		Optimization of geometric parameters for mode-I fracture analyse on glass fibre woven mat thermoplastic laminated compositesMaterials Today: Proceedings 2021, 52, 2474-2478
96P Navaneethakrishnan Tottyeapalayam Palanisamy Sathishkumar,
Ponnuswamy Maheskumar		Thermal stability and tribological behaviours of tri-fillers reinforced epoxy hybrid compositesApplied Science and Engineering Progress14,4, 727-737, 2021
97P Navaneethakrishnan
S Satheeshkumar,
Rajini Nagarajan,
Sikiru O Ismail,
Suchart Siengchin,
Faruq Mohammad,
Hamad A Al-Lohedan		Effect of Angle Ply on the Mechanical Performance of Jute Fibre Woven Mat/Epoxy Composites with Varying Ageing ConditionsApplied Science and Engineering Progress14,4, 737-747, 2021
98P Navaneethakrishnan
PC Murugan,
S Joseph Sekhar		An experimental investigation on utilizing cassava stalk as biomass sources in a gasifierIOP Conference Series: Materials Science and Engineering1057,1, 012040, 2021
99P Navaneethakrishnan M Sambathkumar,
KSK Sasikumar,
R Gukendran,
K Ponappa		Investigation of Mechanical and Corrosion Properties of al 7075/garnet Metal Matrix composites by two-stage Stir Casting ProcessArchives of Metallurgy and Materials66, 2021
100P Navaneethakrishnan
TP Sathishkumar,
S Ramakrishnan		Mechanical behaviours of aluminium filler and jute fibre mat reinforced epoxy hybrid compositesHybrid Natural Fibre Composites (Book chapter)21-40, 2021
101P Navaneethakrishnan
K. Ramachandran
M. Sivaraja		The Influence of Nickel Oxide Nano particle Dispersion on the Thermo Stability of Lubricant OilJournal of Nanoscience19, 01, 1850044, 2020
102P Navaneethakrishnan N.Rajini,
T.P.Sathishkumar,
M M. Jegan,
P.Maheshkumar,
S.Kalirasu		Effect of Various Orientation of Banana Fibre Woven Mat on Fracture Behaviours of Laminated Epoxy CompositesJournal of Nanoscience25,02,2020
103P Navaneethakrishnan
TP Sathishkumar,
S Ramakrishnan,		Effect of Glass and Banana Fibre Mat Orientation and Number of Layers on Mechanical Properties of Hybrid CompositesBiofibres and Biopolymers for Bio composites295-312, 2020
104P Navaneethakrishnan,
K Velusamy,
G Rajeshkumar,
TP Sathishkumar		The influence of fibre content and length on mechanical and water absorption properties of Calotropis Gigantea fibre reinforced epoxy compositesJournal of Industrial Textiles48 (8), 1274- 12902019
105P.Navaneethakrishnan,
TP Sathishkumar,
SA Kumar
P I Siva N
Rajini		Synergy of cashew nut shell filler on tribological behaviours of natural-fibre- reinforced epoxy compositeScience and Engineering of Composite Materials25 (4), 761- 772, 2019
106P.Navaneethakrishnan C.MuthukumarEvaluation of tensile and thermal behaviour analysis of Coccinia Indica fibreJournal of the Chinese society of mechanical engineers39/1-12/, 2018
107P.Navaneethakrishnan
K Velusamy,
S Jayabal,
P Elumalai		Characterization of calotropis gigantea fibre and its compositesJournal of Manufacturing Engineering13,3 176-181,2018
108P.Navaneethakrishnan
K Velusamy
G Rajeshkumar
TP Sathishkumar		The influence of fiber content and length on mechanical and water absorption properties of Calotropis Gigantea fiber reinforced epoxy compositesJournal of Industrial Textiles1/17, 2018
109P.Navaneethakrishnan
M.Vijayakumar
G.Kumaresan
R.Kamatchi		A study on heat transfer characteristics of inclined copper sintered wick heat pipe using surfactant free CuO and Al2O3 nanofluidsJournal of the Taiwan Institute of Chemical Engineers81/190-198, 2017
110P.Navaneethakrishnan
TP Sathishkumar
J Naveen
S Satheeshkumar
N Rajini		Characterization of sisal/cotton fibre woven mat reinforced polymer hybrid compositesJournal of industrial textiles47/4/ 429- 452, 2017
111P.Navaneethakrishnan
TP Sathishkumar
S Arun Kumar
I Siva
N Rajini		Synergy of cashew nut shell filler on tribological behaviours of natural-fibre- reinforced epoxy compositeScience and Engineering of Composite Materials25/4/761– 772, 2017
112P.Navaneethakrishnan
M. Sambathkumar
K. Ponappa
K.S.K Sasikumar		Mechanical and Corrosion Behaviour of Al7075 (Hybrid) Metal Matrix Composites by Two Step Stir Casting ProcessLatin American Journal of Solids and Structures14/2/243-255, 2017
113P.Navaneethakrishnan M.Vijayakumar
G.Kumaresan		Thermal characteristics studies on sintered wick heat pipe using CuO and Al2O3 nanofluidsExperimental Thermal and Fluid Science79/25-35, 2016
114P.Navaneethakrishnan
N.Venkatachalam
R.Rajsekar
S.Shankar		Effect of Pre- treatment Methods on Properties of Natural Fibre Composites: A ReviewPolymers & Polymer Composites24/7/555- 566, 2016
115P.Navaneethakrishnan
M Vijayakumar
R Mohan		Experimental Investigation of Planted Pin Fin in Plate Fin Heat Sink for Electronics coolingJP Journal of Heat and Mass Transfer13/2/143, 2016
116P.Navaneethakrishnan N.Venkatachalam
TP Sathishkumar		Characterization of novel Passiflora foetida natural fibres for paper board industryJournal of Industrial Textiles2016
117P.Navaneethakrishnan
M. Sambathkumar
K. Ponappa
K.S.K. Sasikumar
P. Arunkumar		Analysis of al7075 hybrid metal matrix composite using Two-dimensional microstructure model based finite Element methodInternational Journal of Advanced Engineering Technology7/2/180-183, 2016
118P.Navaneethakrishnan
A Sivakumar
SS Darun Prakash		Dynamic Risk Identification Using Fuzzy Failure Mode Effect Analysis in Fabric Process Industries: A Research Article as Management PerspectiveInternational Journal of Social, Behavioural, Educational, Economic, Business and Industrial Engineering9/1/276-280, 2015
119P. Navaneethekrishnan
A Sivakumar		Implementation of Robust Framework for Improvement of Productivity through TPM. A Research ArticleJournal of Applied Mechanics and Materials472,1099-1104, 2014
120P.Navaneethakrishnan S.Velumani
S.Jayabal		Mathematical Modelling and Optimization of Mechanical Properties of Short Coir Fiber- Reinforced Vinyl Ester Composite Using Genetic Algorithm MethodMechanics of Advanced Materials and Structures21/7/559-565, 2014
121P.Navaneethakrishnan T.P.Sathish kumar
S. Shankar
R. Rajasekar		Mechanical properties and water absorption of short snake grass fiber reinforced isophthallic polyester compositeFibers and polymers15/9/1927-1934, 2014
122P.Navaneethakrishnan
T.P.Sathish kumar
J. Naveen,
S. Satheeshkumar		Hybrid fiber reinforced polymer composites – a reviewJournal Reinforced Plastics and Composites33/5/454–471, 2014
123P.Navaneethakrishnan T.P.Sathish kumar
N. Saravanan
R. Rajasekar
S. Mahalakshmi
K. S. K. Sasikumar
S. Sahoo		Graphene and modified graphene- based polymer nanocomposites – A reviewJournal Reinforced Plastics and Composites33/12/1158–1170, 2014
124P.Navaneethakrishnan T.P.Sathish kumar
J. Naveen
S. Satheeshkumar		Glass fiber reinforced polymer composites- a review.Journal Reinforced Plastics and Composites33/13/1258–1275, 2014
125T.P.Sathish kumar
S. Shankar
R. Rajasekar		Investigation of chemically treated randomly oriented sansevieria ehrenbergii fiber reinforced isophthallic polyester compositesJournal Composite Materials48/24/ 2961-2975, 2014
126P.Navaneethakrishnan
K. Velusamy
S.Vendan Arungalai,
K.SaravanaKumar		Experimental Investigations to Evaluate the Mechanical Properties and Behavior of Raw and Alkali Treated King’s Crown (Calotropis Gigantea) Fiber to be Employed for Fabricating Fiber CompositeApplied Mechanics & Materials598/73-77, 2014
127P.Navaneethakrishnan
VR Muruganantham
KK Arun		Integrated application of TRIZ with lean in the manufacturing process in a machine shop for the productivity improvementInternational Journal of Productivity and Quality Management13/4/414-429, 2014
128P.Navaneethakrishnan
S Jayabal
S Velumani
K Palanikumar		Mechanical and machinability behaviors of woven coir fiber-reinforced polyester compositeFibers and Polymers14/9/11505-1514, 2013
129P.Navaneethakrishnan
S Velumani,
P S Jayabal
DS Robinson Smart		Optimization of mechanical properties of non- woven short sisal fibre-reinforced vinyl ester composite using factorial design and GA methodBulletin of Materials Science36/4/575-583, 2013
130P.Navaneethakrishnan
PSS Srinivasan
S Dhandapani		Effect of heating coil in commercial shop display cabinetJournal of the Indian Institute ofScience86/5/457, 2013
131Shyjith,
Kailas;
Ilangkumaran,
Maari Kumanan,
Sabhya		Multi Criteria decision making approach to evaluate optimum maintenance strategy in textile IndustryJournal of Quality in Maintenance Engineering14, 4, 375-386, 2008
132Ilangkumaran, M
Kumanan, S 		Selection of maintenance policy for textile industry using hybrid multi criteria decision making approachJournal of Manufacturing Technology Management20,7,1009-1022, 2009
133Shanmugam, P
Sivakumar, V
Murugesan, A
Ilangkumaran, M		Performance and exhaust emissions of a diesel engine using hybrid fuel with an artificial neural networkEnergy Sources, Part A: Recovery, Utilization, and Environmental Effects33, 15, 1440-1450, 2011
134Ilangkumaran M
Sasirekha V
Anojkumar L
Boopathi Raja M		Machine tool selection using AHP and VIKOR methodologies under fuzzy environmentInternational Journal of Modelling in Operations Management2, 4, 409-436, 2012
135Ilangkumaran, M
Sasirekha, V
Dinesh, M
Jegan, MM
Loganathan, T
Mouleeshwaran, KM
Raja, Boopathi
Pallikadath, Nizamuddin
Kumar, S Praveen
Raj, T Ruban Sundara		A hybrid MCDM approach to supplier selectionInternational Journal of Engineering Management and Economics3,4,279-304, 2012
136Sakthivel, G;
Ilangkumaran, M;
Nagarajan, G;
Raja, A;
Ragunadhan, PM;
Prakash, J; 		A hybrid MCDM approach for evaluating an automobile purchase modelInternational journal of information and decision sciences5,1, 50-85, 2013
137Ilangkumaran, M;
Kumanan, Somasundaram; 		Application of hybrid VIKOR model in selection of maintenance strategyInternational Journal of Information Systems and Supply Chain Management (IJISSCM)5, 2, 59-81, 2012
138Sakthivel, Gnanasekaran;
Ilangkumaran, Mani;
Nagarajan, Govindan; 		Predicting the engine performance using ethyl ester of fish oil with the aid of artificial neural networkInternational Journal of Ambient Energy34, 3, 145-158, 2013
139Ilangkumaran, M;
Avenash, A;
Balakrishnan, V;
Kumar, S Barath;
Raja, M Boopathi; 		Material selection using hybrid MCDM approach for automobile bumperInternational Journal of Industrial and Systems Engineering14, 1, 20-39, 2013
140Sakthivel, Gnanasekaran; Ilangkumaran, Mani; Nagarajan, Govindan; Priyadharshini, G Vasuki; Dinesh Kumar, Subramanian; Satish Kumar, Shekar;
Suresh, Kettal Sarangapani; Thirumalai Selvan, Govindan; Thilakavel, Thirunavukarasu; 		Multi-criteria decision modelling approach for biodiesel blend selection based on GRA–TOPSIS analysisInternational Journal of Ambient Energy35, 3, 139-154, 2014
141Ilangkumaran, M; Thamizhselvan, P; Integrated hazard and operability study using fuzzy linguistics approach in petrochemical industryInternational journal of quality & reliability management27, 5, 541-557, 2010
142Sakthivel, G;
Nagarajan, G;
Ilangkumaran, M;
Shanmugam, P;
Prakash, J; 		Effect of fuel additives on performance and exhaust emissions of direct injection diesel engine operating on B20 waste fish oilInternational Journal of Oil, Gas and Coal Technology6, 4, 462-476, 2013
143Sakthivel, G;
Nagarajan, G;
Ilangkumaran, M;
Kumar, S Sathish;
Suresh, KS; 		A hybrid multi–criteria decision support system for selection of optimum fuel blendInternational Journal of Exergy12, 4, 463-490, 2013
144Ilangkumaran, M;
Sasirekha, V;
Anojkumar, L;
Sakthivel, G;
Boopathi Raja, M;
Ruban Sundara Raj, T; Siddhartha, CNS;
Nizamuddin, P;
Praveen Kumar, S; 		Optimization of wastewater treatment technology selection using hybrid MCDMManagement of Environmental Quality: An International Journal24, 5, 619-641, 2013
145Ilangkumaran, M;
Sakthivel, G;
Syam Kumar, U; Vasudevan, M;
Venkatesh, S;
Viswanathan, B; 		Development of fuzzy logic model to predict the engine performance of fish oil biodiesel with diethyl etherInternational Journal of Ambient Energy36, 3,142-154, 2015
146Sakthivel, G;
Ilangkumaran, M;
Nagarajan, G;
Shanmugam, P; 		Selection of best biodiesel blend for IC engines: an integrated approach with FAHP-TOPSIS and FAHP-VIKORInternational Journal of Oil, Gas and Coal Technology6, 5, 581-612, 2013
147Anojkumar, L; Ilangkumaran, M; Sasirekha, V; Comparative analysis of MCDM methods for pipe material selection in sugar industryExpert systems with applications41, 6, 2964-2980, 2014
148Sakthivel, G;
Nagarajan, G;
Ilangkumaran, M; 		Experimental investigations of the performance, emission and combustion characteristics of a biodiesel (ethyl ester of fish oil) fuelled direct-injection diesel engineInternational Journal of Vehicle Performance1, 2, 137-156, 2013
149Sakthivel, G;
Ilangkumaran, M; 		Development of decision support system to select the best fuel blend in IC engines to enhance the energy efficiencyInternational journal of energy technology and policy9, 4, 310-343, 2013
150Sakthivel, G;
Nagarajan, G;
Ilangkumaran, M;
Gaikwad, Aditya Bajirao; 		Comparative analysis of performance, emission and combustion parameters of diesel engine fuelled with ethyl ester of fish oil and its diesel blendsFuel132, 116-124, 2014
151Kullolli, Shridhar;
Sakthivel, G;
Ilangkumaran, M; 		A neural network model for the prediction of compression ignition engine performance at different injection timingsInternational Journal of Ambient Energy37, 3, 227-236, 2016
152Anojkumar, L;
Ilangkumaran, M;
Kirubakaran, B;
Arulmuruga, L;
Mohamed Hassan, S;
Lokesh, S;		A Novel Method For Material Selection In Industrial ApplicationsInternational Research Journal of Engineering and Technology3, 11, 439-443, 2014
153Sakthivel, G;
Snehitkumar, B;
Ilangkumaran, M; 		Application of fuzzy logic in internal combustion engines to predict the engine performanceInternational Journal of Ambient Energy37, 3, 273-283, 2016
154Durairaj, S;
Sathiya Sekar, K;
Ilangkumaran, M;
RamManohar, M;
Thyalan, B;
Yuvaraj, E;
Ramesh, S; 		Multi-criteria decision model for biodiesel selection in an electrical power generator based on FAHP-GRA-TOPSISInternational Journal of Research in Engineering and Technology3, 23, 226-233, 2014
155Sakthivel, G;
Ilangkumaran, M;
Gaikwad, Aditya; 		A hybrid multi-criteria decision modeling approach for the best biodiesel blend selection based on ANP-TOPSIS analysisAin shams engineering journal6, 1, 239-256,
156Ilangkumaran, M;
Shanmugam, P;
Sakthivel, G;
Visagavel, K; 		Failure mode and effect analysis using fuzzy analytic hierarchy processInternational Journal of Productivity and Quality Management14, 3, 296-313, 2014
157Ilangkumaran, M; Karthikeyan, M; Ramachandran, T; Boopathiraja, M; Kirubakaran, B; Risk analysis and warning rate of hot environment for foundry industry using hybrid MCDM techniqueSafety science72, 133-143, 2015
158Ilangkumaran, M;
Sakthivel, G;
Nagarajan, G; 		Artificial neural network approach to predict the engine performance of fish oil biodiesel with diethyl ether using back propagation algorithmInternational Journal of Ambient Energy37, 5, 446-455, 2016
159Ilangkumaran, M;
Sakthivel, G;
Sasirekha, V; 		Waste water treatment technology selection using FAHP and GRA approachesInternational Journal of Environment and Waste Management14, 4, 392-413, 2014
160Kirubakaran, B;
Ilangkumaran, M; 		The selection of optimum maintenance strategy based on ANP integrated with GRA-TOPSISJournal for Global Business Advancement8, 2, 190-215, 2015
161Anojkumar, L; Ilangkumaran, M; A combination of data analytic and compensatory methodology for material selection in sugar manufacturing industryInternational Journal of Manufacturing Technology and Management28, 6, 231-256, 2014
162Ilangkumaran, M;
Sasikumar, R;
Sakthivel, G; 		Parametric optimization for the production of nanostructure in high carbon steel chips via machiningAin Shams Engineering Journal6, 3, 957-965, 2015
163Sasirekha, V;
Chandrasekar, C;
Ilangkumaran, M; 		Heterogeneous wireless network vertical handoff decision using hybrid multi-criteria decision-making techniqueInternational Journal of Computational Science and Engineering10, 3, 263-280, 2015
164Sakthivel, G;
Ilangkumaran, M; 		A hybrid multi-criteria decision making approach of ANP and TOPSIS to evaluate the optimum fuel blend in IC engineInternational Journal of Decision Support Systems1, 3, 268-293, 2015
165Anojkumar, L;
Ilangkumaran, M;
Vignesh, M; 		A decision making methodology for material selection in sugar industry using hybrid MCDM techniquesInternational Journal of Materials and Product Technology51, 2, 102-126, 2015
166Sakthivel, G;
Ilangkumaran, M; 		Optimisation of compression ignition engine performance with fishoil biodiesel using Taguchi-Fuzzy approachInternational Journal of Ambient Energy38, 2, 146-160, 2017
167Durairaj, S;
Sathiyasekar, K;
Ilangkumaran, M; 		Selection of alternate fuel for electrical power generator using hybrid multi criteria decision making techniqueScientific Bulletin-University Politehnica of Bucharest, Series C78, 1, 247-258, 2016
168Ilangkumaran, M;
Sasikumar, R;
Sakthivel, G; 		Application of Taguchi and grey-fuzzy model to optimise the machining parameters of nanocrystalline structured chips production in high carbon steelInternational Journal of Fuzzy Computation and Modelling1, 4, 411-430, 2015
169Sakthivel, Gnanasekaran; Ilangkumaran, Mani;
Ikua, Bernard W; 		Selection of optimum fish oil fuel blend to reduce the greenhouse gas emissions in an IC engine—A hybrid multiple criteria decision aid approachInternational journal of green energy13, 14, 1517-1533, 2016
170Sasirekha, V;
Ilangkumaran, M;
Sakthivel, G; 		A comparative analysis of fuzzy-based AHP derived MCDM methods to select the apt heterogeneous wireless networkInternational Journal of Information and Decision Sciences8, 3, 227-253, 2016
171Anojkumar, L;
Ilangkumaran, M;
Hassan, S Mohamed; 		An integrated hybrid multi-criteria decision making technique for material selection in the sugar industryInternational Journal of Multicriteria Decision Making6, 3, 247-268, 2016
172Gnanasekaran, Sakthivel;
Saravanan, N;
Ilangkumaran, M;
Influence of injection timing on performance, emission and combustion characteristics of a DI diesel engine running on fish oil biodieselEnergy116, 1218-1229, 2016
173Kirubakaran, B;
Ilangkumaran, M; 		Selection of optimum maintenance strategy based on FAHP integrated with GRA–TOPSISAnnals of Operations Research245, 285-313,2016
174Ilangkumaran, M
Varatharaju Perumal 		Experimental analysis of engine performance, combustion and emission using pongamia biodiesel as fuel in CI engineEnergy129, 15, 228–236, 2017
175Sakthivel, G;
Senthil Kumar, S;
Ilangkumaran, M; 		A genetic algorithm-based artificial neural network model with TOPSIS approach to optimize the engine performanceBiofuels10, 6, 693-717, 2019
176Arulmurugan, L;
Ilangkumaran, M; 		Enhancement of heat transfer using phase change material with water mixtureJ. Ovonic. Res.13, 6, 299-305, 2017
177Durairaj, S;
Sathiyasekar, K;
Ilangkumaran, M; 		DECENTRALISED GREEN POWER GENERATION USING METHYL ESTERS OF NONEDIBLE OILS.Tehnicki vjesnik/Technical Gazette24, 6, 2017
178Durairaj, S;
Sathiyasekar, K;
Ilangkumaran, M; 		Decentralizirana proizvodnja zelene energije pomoću metil estera nejestivih uljaTehnički vjesnik24, 6, 1723-1728, 2017
179Perumal, Varatharaju;
Ilangkumaran, M; 		Water emulsified hybrid pongamia biodiesel as a modified fuel for the experimental analysis of performance, combustion and emission characteristics of a direct injection diesel engineRenewable energy121, 623-631, 2018
180Perumal, Varatharaju; Ilangkumaran, M; Experimental analysis of operating characteristics of a direct injection diesel engine fuelled with Cleome viscosa biodieselFuel224, 379-387, 2018
181Perumala, Varatharaju;
Ilangkumaranb, M; 		Performance and emission characteristics of direct injection diesel engine by using water emulsified diesel as fuelInternational journal of engineering technology5, 476-484, 2017
182Loganathan, Arulmurugan; Mani, Ilangkumaran; Decision Making Methodology for Heat Sink Material Selection Using a Compromise Ranking and Outranking Method under Fuzzy EnvironmentJOURNAL OF ADVANCES IN CHEMISTRY12, 12, 4564-4575, 2016
183Parthipan, N;
Ilangkumaran, M;
Nandhakumar, S;
Christal, K; 		Eco Friendly Drilling Process in AISI SS317 MaterialJournal of Chemical and Pharmaceutical Sciences ISSN974, 2115, 2017
184Sasirekha, V;
Ilanzkumaran, M; 		Heterogeneous wireless network selection using FAHP integrated with TOPSIS and VIKOR2013 International Conference on Pattern Recognition, Informatics and Mobile Engineering399-407, 2013
185Varatharaju Perumal,
M. Ilangkumaran; 		The influence of copper oxide nano particle added pongamia methyl ester biodiesel on the performance, combustion and emission of a diesel engineFuel232, 791 – 802, 2018
186Prabhu, Sundararaj Raghavendra;
Ilangkumaran, Mani; 		Selection of 3D printer based on FAHP integrated with GRA-TOPSISInternational Journal of Materials and Product Technology58, 3, 155-177, 2019
187Parthipan, N;
Ilangkumaran, M;
Maridurai, T;
Prasanna, SC; 		Effect of silane treated silicon (IV) oxide nanoparticle addition on mechanical, impact damage and drilling characteristics of kenaf fibre-reinforced epoxy compositeSilicon12, 459-467, 2020
188Nithiyesh Kumar, C;
Ilangkumaran, M; 		Experimental study on thermal performance and exergy analysis in an internally grooved tube integrated with triangular cut twisted tapes consisting of alternate wingsHeat and Mass Transfer55, 1007-1021, 2019
189Balakrishnan, Kirubakaran, Mani, Ilangkumaran, Karthikeyan, M Maintenance strategy evaluation based on AHP and TOPSISJournal of advances in chemistry12, 26, 5744-5751, 2016
190Loganathan, Arulmurugan; Mani, Ilangkumaran; A fuzzy based hybrid multi criteria decision making methodology for phase change material selection in electronics cooling systemAin shams engineering journal9, 4, 2943-2950, 2018
191Vijayanand, MS; Ilangkumaran, M; ANN modelling of small hole drilling on monel metal by using electrical discharge machiningPulse1, 2, 3
192Parthipan, N;
Ilangkumaran, M; 		Material synthesis, characterization and performance measurement of laser drilling for stir casted Cu-Ni-Tib2 metal matrixMaterials Today: Proceedings21, 392-400, 2020
193Prakash, J;
Ilangkumaran, M; 		RETRACTED: An investigation of various actuation mechanisms in robot armMeasurement and Control52, 10, 1299-1307, 2019
194Prabhu, Sundararaj Raghavendra;
Ilangkumaran, Mani; 		Decision making methodology for the selection of 3D printer under fuzzy environmentInternational Journal of Materials and Product Technology59, 3, 239-252, 2019
195Ragupathi, Kandasamy;
Mani, Ilangkumaran; 		Durability and lube oil contamination study on diesel engine fueled with various alternative fuels: A reviewEnergy Sources, Part A: Recovery, Utilization, and Environmental Effects43, 8, 932-943, 2021
196Arulmurugan, L; Ilangkumaran, M; Experimental study on graphene/transition metal chalcogenide based energy storage and conversionJournal of Ovonic Research Vol16, 4, 197-211, 2020
197Arulmurugan, L;
Prabhu, S Raghavendra;
Ilangkumaran, M;
Suresh, V;
Saravanakumar, R;
Raghunath, M; 		Kinematics and plane decomposition algorithm for non linear path planning navigation and tracking of unmanned aerial vehiclesIOP Conference Series: Materials Science and Engineering995, 1, 12019, 2020
198Krishnakumar Subramanian
Ilangkumaran Mani		Influential Parameters and Multi Objective Optimization of Bagasse and Palm Kernel Natural Fibre Plates Using Taguchi Assisted TopsisMateriale Plastice59 (1), 2022, 194-206
199K.S. Prabhakaran, Dr.K.VisagavelPerformance improvement of solar powered evaporative cooler using versatile ecological balanced control techniqueMicroprocessor and Microsystems72,  102900, 2020
200A. Godwin Antony
V. Sivakumar
K.Visagavel		Enhancement of induced natural ventilation using various ventilator configuration in single side ventilated building using CFDIndian Journal of Geo Marine Sciences49 (03), 2020, 503-506
201J Prakash
M Ilangkumaran		An investigation of various actuation mechanisms in robot armMeasurement and control1-7, 2017
202Panneerselvam N,
Murugesan A,
Vijayakumar C,
Kumaravel A
Subramaniam D		Effect of injection timing on biodiesel fuelled engine characteristics- An overview Renewable and Sustainable Energy Reviews50, 17-31, 2015
203Vijayakumar C,
Murugesan A,
Panneerselvam N,
Subramaniam D,
Bharathiraja M		The role of nano additives for biodiesel and diesel blended transportation fuelsTransportation Research Part D46, 145–156, 2016
204Panneerselvam N, Murugesan A,
Vijayakumar C Subramaniam D		Performance, emissions and combustion characteristics of CI engine fuel with watermelon (Citrullus Vulgaris) methyl esterInternational Journal of Ambient Energy1-7, 2015
205Panneerselvam N,
Ramesh N,
Murugesan A,
Vijayakumar C, Subramaniam D,
Kumaravel A.		Effect on direct injection naturally aspirated diesel engine characteristics fuelled by pine oil, ceiba pentandra methyl ester compared with dieselTransportation Research Part D 48, 225–234
206Panneerselvam N,
Murugesan A,
Vijayakumar C
Subramaniam D		Computational engine performance and emission analysis using ceiba pentandra biodiesel’Biofuels7, 3, 201-206, 2016
207Panneerselvam N,
Murugesan A,
Vijayakumar C
Subramaniam D		Optimization of biodiesel produced from watermelon (Citrullus Vulgaris) by using batch type production unitEnergy Sources, Part A: Recovery, Utilization, andEnvironmental Effects38, 16, 2343-2348, 2016